Procurou por: Industrial Physics

Código de Artigo: (SIMELD3059)

Fornecedor: Industrial Physics

Descrição: This pictorial standard shows two uncoated, rusted steel surfaces (Conditions C and D) before and after wet abrasive blast cleaning. Photographs illustrate two degrees of cleaning (WAB 6 and WAB 10) for each initial condition with additional photos that depict the appearance of light, moderate, and heavy flash rust after cleaning. Also contains a written guide to the use of reference photographs and additional explanatory notes. Cleanliness requirements for conditions depicted are defined by the joint SSPC/NACE surface preparation specifications for commercial (SP 6/NACE 3) and near-white blast cleaning (SP 10/NACE 2). Photos of commercial and near white surfaces achieved by dry abrasive blast cleaning can be found in SSPC-VIS 1.

UOM: 1 * 1 unid.

Promoção

Código de Artigo: (SIMELD0560)

Fornecedor: Industrial Physics

Descrição: This densimeter is designed to perform automatic calculation of density and compensation of water temperature.

UOM: 1 * 1 unid.

Promoção

Fornecedor: Industrial Physics

Descrição: Adjustable Micrometer Film Applicator. The applicator blade can be adjusted in 10 μm increments by means of 2 μm heads, over a gap size from 0 to 8 mm.

Fornecedor: Industrial Physics

Descrição: These temperature probes can be connected to instruments suited for changeable probes (type ‘K’) using a plug connection.

Código de Artigo: (SIMELD0015)

Fornecedor: Industrial Physics

Descrição: This roughness meter offers a choice of 39 parameters.

UOM: 1 * 1 unid.

Promoção

Fornecedor: Industrial Physics

Descrição: Multi-functional film applicator with 4 application sides for applying paint films of 4 different predefined thicknesses. The applicators are available in film widths of 60, 80 mm and one side of the applicator is supplied with a guidance support for straight application. Made from high grade stainless steel, the multi-functional film applicator will not be affected by acid or base elements.

Fornecedor: Industrial Physics

Descrição: Dip cups can be used to provide a quick `break-thread' flow time comparative measurements.

Fornecedor: Industrial Physics

Descrição: Impact testers used to determine the impact resistivity and flexibility of materials.

Código de Artigo: (SIMELD3058)

Fornecedor: Industrial Physics

Descrição: The SSPC-VIS 4/NACE VIS 7 shows six different steel surfaces - two uncoated and four previously coated - before and after waterjetting.

UOM: 1 * 1 unid.

Promoção

Código de Artigo: (SIMEVF8700)

Fornecedor: Industrial Physics

Descrição: Accelerated corrosion test on panels and construction parts.

UOM: 1 * 1 unid.

Promoção

Código de Artigo: (SIMEDI0201)

Fornecedor: Industrial Physics

Descrição: This radius meter provides round edges in outward exposed windows, doors and window frames, with a minimal radius.

UOM: 1 * 1 unid.

Promoção

Fornecedor: Industrial Physics

Descrição: This stiffness tester is used to assess material stiffness and material resiliency for materials such as paper products, cardboard, plastics, textiles, metals, felts, tubing, wire, rubber and other sheet materials can be evaluated.

Código de Artigo: (SIMETB2100)

Fornecedor: Industrial Physics

Descrição: The Taber® multi-finger scratch / mar tester is used to measure the relative resistance or susceptibility of a material surface to scratching, marring, gouging, scraping, engraving and other similar physical damage that can’t be classified as ordinary wear.

UOM: 1 * 1 unid.

Promoção

Fornecedor: Industrial Physics

Descrição: Accessory for coating tester, Synthetic template for Buchholz test

Código de Artigo: (SIMELD3020)

Fornecedor: Industrial Physics

Descrição: Pictorial standard book with rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings. Also called 'Swedish Blast Degrees' or Sa-standards). The original visual standard. It shows the degree of cleanliness of four different levels of rusted steel cleaned by grit blasting, hand/power tool and flame cleaning.

UOM: 1 * 1 unid.

Promoção

Fornecedor: Industrial Physics

Descrição: These basic sets are designed to perform all measurements and tests regarding painting.