Procurou por: UPCHURCH SCIENTIFIC

Código de Artigo: (UPCHP-780)

Fornecedor: UPCHURCH SCIENTIFIC

Descrição: Use this tubing expanding awl when working with barbed fittings. Sometimes the tubing can be too tight to fit over the barb properly. This awl can also be used with semi-rigid tubing, for those rare applications where this tubing needs to be paired with a barbed fitting. By expanding the int.Ø of the tubing, it will make it an easier process to insert the barbed fitting into place.

UOM: 1 * 1 unid.

Promoção

Fornecedor: UPCHURCH SCIENTIFIC

Descrição: <B>Uniões com volume morto zero de PEEK: </B>As uniões com volume morto zero (ZDV) são fornecidas completas com duas guarnições de aperto manual F-300 para tubos com D.E. de ¹/₁₆" e possuem uma pressão nominal até 5000 psi (344 bar).

Fornecedor: UPCHURCH SCIENTIFIC

Descrição: Upchurch Scientific® LiteTouch®, LT-132, ferrule, PEEK natural/stainless steel, 10-32 coned port, for 1/32" OD tubing, 5000 psi

Fornecedor: UPCHURCH SCIENTIFIC

Descrição: Inline filters consist of a stainless steel body and two PEEK end fittings.

Fornecedor: UPCHURCH SCIENTIFIC

Descrição: Upchurch Scientific®, A-107 semi-prep frit, Porosidade: 10,0 µm, Espessura: 1,6 mm, Frit Ø ext.: 4, 8 mm, Sinterizado, o volume: 9,1 µl, Materiais sinterizados: Aço inoxidável, Ring ext. Ø: 6,5 mm, Ring material: PCTFE

Fornecedor: UPCHURCH SCIENTIFIC

Descrição: These filters are designed to seal and filter simultaneously by incorporating a frit into the body of a flat-bottom ferrule.

Fornecedor: UPCHURCH SCIENTIFIC

Descrição: These PEEK sample loops are metal-free alternatives to stainless steel loops. PEEK loop ends are provided with clean, straight cuts for easy valve installation.

Fornecedor: UPCHURCH SCIENTIFIC

Descrição: PEEK.

Fornecedor: UPCHURCH SCIENTIFIC

Descrição: Semi-prep inline filters
- Designed for high flow applications
- Flow rates up to 100 ml/min
- Pressure rated to 7500 psi (517 bar)

Fornecedor: UPCHURCH SCIENTIFIC

Descrição: These ultra-low volume back pressure regulators (BPRs) are developed to minimise swept volume, which is especially important for multi-detector applications.

Fornecedor: UPCHURCH SCIENTIFIC

Descrição: Several nut lengths and head styles to fit into a variety of applications, designed to connect ¹/₁₆" OD tubing to 10-32 coned ports, hold up to 9000 psi (620 bar).

Fornecedor: UPCHURCH SCIENTIFIC

Descrição: Made of stainless steel or PEEK.

Fornecedor: UPCHURCH SCIENTIFIC

Descrição: Pressure relief valves are ideal for preventing system over-pressurisation. These products protect system components by diverting fluid flow automatically when inline pressure exceeds the set limit.

Fornecedor: UPCHURCH SCIENTIFIC

Descrição: For fine control of fluid flow rates, these valves can reduce outgoing flow. These needle valves are perfect for use with peristaltic pump fluid transfer applications, mass spectrometry and fraction collection. They can also be used to regulate gas flow in helium sparging lines and as a flow-dependent variable back pressure regulator.

Fornecedor: UPCHURCH SCIENTIFIC

Descrição: Stop a flow stream quickly with these shut-off valves. The bodies are manufactured from either PEEK or ETFE. Both versions feature a PCTFE rotor, making them highly resistant to chemicals. The blue colorant used in some valve configurations has proven not to leach out with common HPLC solvents.

Fornecedor: UPCHURCH SCIENTIFIC

Descrição: Upchurch Scientific®, V-101L right angle flow-switching valve, bulkhead version, 1/16" OD tubing, 1,0 mm thru-hole, 6,2 µl swept volume