Procurou por: Bohlender

Fornecedor: Bohlender

Descrição: Body made of PTFE with two connections with female thread UNF 1/4" 28 G. Valve made of PPS with set screw and lock nut for adjusting and fixing pressure between 0,1 and 5 bar.

Fornecedor: Bohlender

Descrição: Upper side of the screw caps is made of PTFE and lower side is made of silicone-elastomer for balancing unevennesses on sealing surfaces.

Código de Artigo: (BOHLH981-14)

Fornecedor: Bohlender

Descrição: Ground joint reducing set, PTFE, consisting of reducing rings graduated for bridging different cone and socket sizes.

UOM: 1 * 1 SET

Promoção

Fornecedor: Bohlender

Descrição: Made of PFTE, white, with grip and nut of PP, red.

Fornecedor: Bohlender

Descrição: Connector, screw thread coupling, made of PTFE. Two screw caps made of PPS or PBTP with GL thread and a PTFE/FPM gasket. The product is only exposed to PTFE.

Fornecedor: Bohlender

Descrição: PTFE/FPM and PS.

Fornecedor: Bohlender

Descrição: Used for temperature measurement in aggressive liquids and ideal for built-in measurement cables.

Fornecedor: Bohlender

Descrição: Block made of PTFE with one inlet and four outlets with female thread UNF ¼"28 G.

Fornecedor: Bohlender

Descrição: Thermoelectric flanging tools are used for making flanges at the ends of plastic tubing such as PTFE, PFA and FEP tubings.

Fornecedor: Bohlender

Descrição: Extension of the number of capillary and/or tubing connectors on a b.safe Waste Cap. With PFA Fittings for capillaries with Ext.Ø 1,6/2,2/3,2 mm (thread UNF ¹/₄"), 1 hose connector for tubing Int.Ø 5,5 to 8,0 mm (thread NPT ¹/₈").

Fornecedor: Bohlender

Descrição: All adaptors of this type are supplied with a male thread, a female thread and recessed grips.

Fornecedor: Bohlender

Descrição: For assembly of components with ground joint cone NS 29/32 on bottles and vessels with GL 45 thread.

Código de Artigo: (590-0196)

Fornecedor: Bohlender

Descrição: Straight fitting made of PTFE, capillary connection on both sides (UNF ¹/₄" thread), with 2 PFA fittings each for tubing Ext.Ø 1,6/2,2/3,2 mm.

UOM: 1 * 1 unid.

Promoção

Código de Artigo: (BOHLR1161-01)

Fornecedor: Bohlender

Descrição: Conical sealing ring made of static dissipative PTFE-EX.

UOM: 1 * 1 unid.

Promoção

Código de Artigo: (BOHLR1110-32)

Fornecedor: Bohlender

Descrição: Integrate b.safe system caps and b.safe funnels in laboratory hoods or working tables. Liquid solvent waste can be lead directly into canisters via b.safe waste pipes.

UOM: 1 * 1 unid.

Promoção

Código de Artigo: (BOHLR1169-54)

Fornecedor: Bohlender

Descrição: Made of PE, to reduce the bore diameter in table- or countertops from approx. 54 to 30 mm to ensure a safe installation of e.g. b.safe Desktop Mounts or b.safe Multiports in corresponding bores. Consisting of top part, lock washer and silicone gasket to avoid rotating and slipping during installation.

UOM: 1 * 1 unid.

Promoção