Print…

Procurou por: Air+Liquide


11 703  resultados encontrados

SearchResultCount:"11703"

Sort Results

Visualização em Lista Easy View (new)

Classifique os resultados da pesquisa

Código de Artigo: (217-0090)
Fornecedor: KARTELL
Descrição: PP, transparente, com 2 encaixes de mangueira, 8 mm Ø. Ideal para ventilar ou transferir ar, gases ou líquidos em um recipiente com uma luva de junta esmerilhada normal.
UOM: 1 * 1 unid.


Fornecedor: Air Liquide
Descrição: Large storage capacity for straws, cryo-vials and bags. Easy to use immediate access to products and samples. Variety of electronic options on all models.
Stainless steel construction.

Código de Artigo: (113-0480)
Fornecedor: DuPont
Descrição: Specially designed for use with Tyvek® apparel, this hood can help offer enhanced protection for body parts that are more exposed to hazardous substances. The hood is made of Tyvek® which is composed of flash spun high density polyethylene. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres (down to 1 µm in size).
UOM: 1 * 100 unid.


Fornecedor: Air Liquide
Descrição: Aluminium vessels designed for long term storage of biological samples in straws or cryo-vials. Two ranges are available the GT long time range (∅ neck ≥50 mm) and the GT large capacity range (∅ neck ≥80 mm).

Fornecedor: Greiner Bio-One
Descrição: PS, sterile, with lid. Designed for use in air-lift culture where tissue is cultivated in permeable membrane supports (cell culture inserts), with the cell culture medium nourishing the cells from below the membrane and the air exerting its influence from above. If cell culture inserts and conventional cell culture plates are utilised in the air-lift culture, the available volume of culture medium is severely limited. This reduced volume results in an elevated nutrient consumption rate from the lower compartment and an increased number of medium changes.

Environmentally Preferable

Fornecedor: MP Biomedicals
Descrição: Dimethyl Sulfoxide is ideal for use as a cryoprotectant. Also used in chemical reactions, in polymerase chain reactions (PCR) as a PCR cosolvent to help improve yields, especially in long PCR, and as a cryoprotectant vitrification agent for the preservation of cells, tissues and organs. DMSO is used in cell freezing media to protect cells from ice crystal-induced mechanical injury. It is used for frozen storage of primary, sub-cultured, and recombinant heteroploid and hybridoma cell lines, embryonic stem cells (ESC), and hematopoietic stem cells. DMSO is frequently used in the combinations with BSA or fetal bovine serum (FBS). Used to enhance dermal absorption of many chemicals. A solvent for many organic and inorganic compounds including fats, carbohydrates, dyes, resins, and polymers. Used in antifreeze or hydraulic fluids. A cryopreservative for cell cultures. Used in the oxidation of thiols and disulfides to sulfonic acids.

Dimethyl sulfoxide (DMSO) is a highly polar aprotic organic reagent that has exceptional solvent properties for organic and inorganic chemicals.

Physical Apppearance: Liquid
Viscosity: 1.1 centipoises (27 °C)
Vapor Density: 2.7 (vs air)
Vapor Pressure: 0.55 hPa at 20 °C, 0.42 mmHg (20 °C)
Refractive Index: n20/D 1.479(lit.)
Solubility: Soluble in water (1 mL DMSO + 1 mL H2O), methanol, acetone, ether, benzene, chloroform
Código de Artigo: (AIRLACCSECU19)
Fornecedor: Air Liquide
Descrição: This apron with neck tie is ideal for use in environments where cryogenic fluids are a high risk factor for cryogenic burns.
UOM: 1 * 1 unid.


Código de Artigo: (MLDV5315481)
Fornecedor: MOLECULAR DEVICES
Descrição: <p>The ImageXpress® HCS.ai High-Content Screening System captures your imagination with high-quality imaging and analysis, enabling you to acquire the data you need with ease.</p>
UOM: 1 * 1 unid.

Novo produto


Código de Artigo: (461-0324)
Fornecedor: Julabo
Descrição: The compact AWC100 air to water recirculating cooler is designed to remove small heat loads from external systems where cooling water can be above ambient and where temperature control is secondary. Coolers which do not have a refrigeration unit are ideal for use in circuits with Peltier elements, analytical devices, polarimeters, refractometers and CCD cameras. The ventilator speed (i.e. the cooling capacity) can be adjusted in two stages, cooling capacity depends on the temperature difference between return line temperature and ambient temperature. The cooling principle: Warm bath fluid is pumped through the heat exchanger. The heat exchanger is cooled by a ventilator motor and thus removes the produced heat.
UOM: 1 * 1 unid.


Código de Artigo: (720-2651)
Fornecedor: LEICA HISTOLOGY
Descrição: Surgipath ActivFlo Biopsy II cassettes feature a patented 'Fluidic Flow' pore design for maximum reagent exchange. With a 0,67 mm pore size, the cassettes include an innovative V-shape pore design that pulls fluid in and forces air out. The cassettes also feature sloped walls, creating a basket for small tissue management. These two piece cassettes with hinged lids have been designed for the Leica IP C Cassette Printer, with <1% printing error rate.
UOM: 1 * 1.000 unid.


Fornecedor: Dräger
Descrição: To measure the 'spot concentrations' of hydrogen sulphide for use with an Accuro® pump. Uses include determination and measurement of concentration peaks, measurement of personal exposure in the inhalation area, detection of leaks in, for example, pipelines or gas installations, and air analysis in sewers, shafts and confined spaces.
Fornecedor: LEICA HISTOLOGY
Descrição: IP ActivFlo Biopsy I cassettes feature a patented 'Fluidic Flow' pore design for maximum reagent exchange. With a 0,67 mm pore size, the cassettes include an innovative V-shape pore design that pulls fluid in and forces air out. The cassettes feature sloped walls, creating a basket for small tissue management. These one piece cassettes with ‘frangible lids’ have been designed for the Leica IP C Cassette Printer, with <1% printing error rate.

Fornecedor: LEICA HISTOLOGY
Descrição: IP ActivFlo Biopsy I cassettes feature a patented 'Fluidic Flow' pore design for maximum reagent exchange. With a 0,67 mm pore size, the cassettes include an innovative V-shape pore design that pulls fluid in and forces air out. The cassettes feature sloped walls, creating a basket for small tissue management. These one piece cassettes with ‘frangible lids’ have been designed for the Leica IP C Cassette Printer, with <1% printing error rate.

Fornecedor: Integra
Descrição: Este sistema é usado para aspirar, remover ou filtrar líquidos biológicos ou químicos, de forma higiénica e profissional. Todas as funções necessárias estão incorporadas no seu design compacto. Operação com um só botão, permitindo ter o dispositivo sempre pronto a usar.

Código de Artigo: (466-0488)
Fornecedor: Binder
Descrição: These drying ovens for limited quantities of solvents, have high temperature accuracy and silicone- and dust-free stainless steel chambers. Units are widely used for applications such as quality assurance of paints or other liquid coatings. FDL ovens feature an MP controller with adjustable ramp function and integrated weekly program timer with real time function.
UOM: 1 * 1 unid.


Fornecedor: Merck
Descrição: Organic Standard, Indoor air standard, 1×1 ml

Preço sob consulta
O stock para este item é limitado. Por favor, certifique-se de que efetuou o seu login para visualizar o stock disponível. Se a call ainda é exibida e precisar de ajuda, por favor, ligue para 213 600 770
O stock para este item é limitado. Por favor, certifique-se de que efetuou o seu login para visualizar o stock disponível. Se a call está visível e precisar de ajuda, por favor, ligue para 213 600 770
Este produto é sujeito a regulamentação especifica.
Em caso de encomenda, será contactado a solicitar documentação complementar necessária e/ou obrigatória (licença, autorização ou declaração de uso final) para a continuidade do pedido. Agradecemos a vossa compreensão
Este produto é sujeito a regulamentação especifica.
Em caso de encomenda, será contactado a solicitar documentação complementar necessária e/ou obrigatória (licença, autorização ou declaração de uso final) para a continuidade do pedido. Agradecemos a vossa compreensão.
Este produto está bloqueado. Para obter mais informações, contacte a VWR através do número 213 600 770.
O produto pretendido já não se encontra disponível. O produto indicado é um substituto.
Este produto encontra-se em rutura de stock. Poderá encontrar alternativas pesquisando pelo código de artigo indicado acima. Se precisar de ajuda, por favor contacte a VWR através do 213 600 770.
113 - 128 of 11 703
no targeter for Bottom